** [ 참고2 ] **
* Windows 95/98/2000 *
제품 설치후 병렬 포트 드라이버(calmWdm 또는 calmdrv )를 설치해야 합니다.
1. 윈도우에서 시작
버튼을 누른다..
2. 설정-제어판-하드웨어 추가하기 - 다음 버튼
클릭.
3. '아이오, 하드웨어를 목록에서 추가하기'
- 다음 버튼 클릭
4. '기타장치 선택' -다음버튼 클릭
6. '디스크에 있음..' 클릭
7. 설치할 드라이버를 선택합니다.
-
OPENice-C1600을 사용할 경우
CalmSHINE16
밑에 있는 \driver\full\calmWdm.inf 선택
-
IM-400을 사용할 경우
CalmSHINE16
밑에 있는 \driver\invisible\calmdrv.inf 선택
8. 다음 버튼을 계속 누른다.
** [ 참고3 ] **
[Note for
CalmSHINE16 v1.53a]
When
the project open, after the project was moved to
the other folder or directory,
CalmSHINE16
don't add any startup file which was included in
the project.
So, you should add
the startup file(*.s) for the project manually
** [
참고4 ] **
These
Utilities support SMART card device and S3CC410
device(CPAD3 device).
The version
for Other CalmRISC16 and CalmMAC2424 products is
under-developing.
We
will release 1.0 official version of Dos Utilities
in 05/03/2004
** [
참고5 ] **
The
program is updated to support S3CC9E4, S3CC9GC,
S3CC9GW, S3CC9G4 additionally.
** < 업그레이드 정보 > *****
Version
1.55 for Smart Card (12/17/2004)
---------------------------------------------
1.
Hex file Project (DPJ) file can be opend ([File[
-[Hex file Project file] menu)
2. The following
option is added.
"Debugging
under low frequency (lower than 2.5Mhz) or RWG activation"
3. Some options are updated. Refer
to the tool release Note for more information.
Following bugs are fixed.
Fixed
1: A parallel port downloading error when end user
used the Windows NT.
Fixed 2: reload
different *.hxd file problem.
Fixed
3: HW breakpoint handling over writing HW-bp problem
Fixed
4: The “find in files” function has default folder
that end user searched a last folder.
Fixed
5: After one file edit, rebuild all files bug
Fixed
6: A mapfile linking debugging information search
order problem.
Fixed 7: odd size/start
address variable read problem
Fixed
8: The error message like a “reset to emulator”
descript in detail.
(Refer
to "Chapter1.
CalmSHINE/11.error code" in PDF/calmSHINE16.pdf)
Fixed 9: array
data invalid in watch variable view
Fixed
10: project option page bug
Patch1.54e
(10/11/2004)
------------------------------
Note
that this patch is only for the user who uses CalmSHINE16
v1.54d or later(Smart Card)
Fixed 1: Register R0 recovery bug at a specific computer that used a serial communication.
Fixed 2: Display a hidden option likes a "-mem" option.
Fixed 3: a hardware board reset detect by current PC mismatch detect.
Fixed 4: Include lib file path that project option menu can a relative path
Fixed 5: GUI support a mem file parsing for a new linker option.
Fixed 6: No more used "-mc" option.
Fixed 7: bug in local variables view in some map file project
Patch1.54b
(06/14/2004)
------------------------------
Note
that this patch is only for the user who uses CalmSHINE16
v1.54 or v1.54a(Smart Card)
1. New devices, S3CC9E4
and S3FC9UB, are supported.
However
OPENice-C1600's firmware should be upgraded.(1.290->1.300)
2. C-style comments,
// and /* */, are supported in dvm/mem file.
3. Following bugs are
fixed.
- 'Rebuild
All' was executed when executing "Make"
function.
- Timer/Trace
Flags were set in wrong lines in Disassembly mode.
Patch1.54a
(03/26/2004)
------------------------------
Note
that this patch is only for the user who uses CalmSHINE16
v1.54 (Smart Card)
1.
The bug is fixed that
cstartup file was automatically added in case of
custum startup file name.
2. The bug is fixed
that the linker option, "- R", was not
saved.
version1.54
(03/05/2004)
------------------------------
1.
"Hex File Debugging Open.." and "Hex
File Debugging Close" are added to the File
menu.
2. "Source Path.." is
added to the Option menu.
3. Following
Options are added to [Option]-[Project] window
-
"Remain Intermediate *.s file" <-
General
- "Generate
Local Variable life information" <-
Compiler
- "Go
to Definition/ Reference" <-
Linker
4. "Post Build"
page is added to [Option]-[Project] window.
version1.53a
(11/04/2003)
------------------------------
1.
Project options can't be changed in the debug mode.
2.
Both an absolute and a relative path are supported.
[Note]
When the project open,
after the project was moved to the other folder
or directory,
CalmSHINE16 don't add any startup
file which was included in the project.
So,
you should add the startup file(*.s) for the project
manually.
version1.53 (10/08/2003)
------------------------------
1.
'Set PC' menu is added to the Debug menu.
2.
The numbers of files, which can be added to a project,
is increased from 1000 to 1500.
3. The feature
of Register window is changed from 'List Control'
to 'Tree Control' style.
4. The 'Warning Message'
option in [Project]-[Compiler] is changed from 'on-off'
to 'Level'. 5. 'Trace Buffer Overflow break' option
is enabled in the Trace Setup.
6. A file cannot
be changed, if its attribute is 'Read Only'.
version1.523 (03/14/2003)
------------------------------
1. 'CalmSHINE16
for Smart Card' works without the hardware key,
CalmDori-d16
(No
need the key)
2. Build Tools are upgraded.
version1.51
------------------------------
1. User can use
simulator without the Lock key (CalmDori-d16)
version1.42
1. Reduce the
memory consumption of CalmSHINE16 GUI
2. Reduce the Build Time
3. New C compiler options
(Refer to updated Manual 4.1
Compiere Command line options (P.5-17) )
-igcode
-udate
-flash
-flashSEGNAME
4. New Linker options
(Refer to updated Manual 2.COMMAND
LINE OPTIONS (P3-3 ~ 3-4) )
-j
-u
5. Some Project default options are changed
to reduce the build time.
- list off (Assembler option):
checked
- merged list (Linker option):
unchecked
version1.41
Bub Fix
1. Abnormal recoverly
A14 register in an interrupt routine
when "Call stack view"
option is enabled.(-SC)
2. Abnormal operation of Optimizer "Error
can not open DBG.txt"
during building session.
3. Debugging problems in flash area of S3FC9BJ
Debugging problems of S3CC9PB with
V1.40
version1.40
*********Note**********************************************
* The C startup files, csartup***.s,
are changed. *
* *
* **********************************************************
Enhanced Features
1.
[Display message option] option is added to General option window
2. Following Compiler
options are added
*
Small Memory- Data memory (RAM)
*
Small Memory - EEP/FLASH memory
*
BSRD optimization
*
point index is always positive.
3. Map file linking
function is added.
4. Relative path
is applicable in 'mem /include lib/include' path .
5. User can change
the text color and backgraound color of built-in editor.
6. 'save to file'
popup menu is added to the Mac view window.
7. Before a project
is closed, CalmSHINE ask if it should be saved.
8. Reduced the
size of UI default memory from 35Mbyte to 9.5Mbyte.
9. [Go to reference]
function is added
10. When a project
made by lower version CalmSHINE16, a backup file is made.
Bug
Fix
1.
Current PC mismatch error is corrected.
2. CPAD3 simulator
errors are corrected.
-
emul instruction error
-
signal bit clear error in MA0/MA1 register
3. COP register(P/MA0/MA1/)
update error is corrected at watch setup windows,
4. A download
problem is removed.
Downloading
was failed if the size of Data memory is small.
5. A Simulator
bug is fixed
If
the EEPROM AREA was divided into several sections, instructions
in the
EEP
AREA were not executed correctly.
6. A linker option
setting error is corrected.
CalmSHINE16
was crashed when -C option is set.
7. A registe update
problem is remved.
Sometimes
the values of special register wasn't updated in Watch register
view
version1.375
Enhanced feature
1. Supports Korean languagein the built-in editor.
2. Adds 'close/save/save all' to the popup menu
of Tap view.
3. Supports S3CC9ED device (Mem/Mon file)
4. Adds 'Add to watch' to the popup menu of
debug window.
5. Adds the header files sorting function
(ascending or descending) to
the project window
Bug fix
1. Sometimes the program was crashed when a
project was made.
2. Sometimes the program show incorrectly memory
when reading
or writing S3CF9BJ flash memory
Note
1. To use S3CF9BJ, OPENice-C1600 firmware should
be version
1.288 or later and
CalmSHINE16 version also should be version 1.375 or later.
2. In case of using S3CF9BJ device, OPENice-C1600
v 1.287 will
not work with CalmSHINE16 v1.36x
or before.
Please use CalmSHINE16 v1.37
or later.
version1.36
Enhanced
feature
1. Support function
tree/combo box in the opened file(debug mode/edit mode).
2. Support S3CFC9BJ
Flash memory write
3. Go to Line
menu is added.
4. Serial downlaod
speed is supported up to 115200bps.
5. Save to file/buffer
clear menus is deleted from the Trace list view
6. The finger
icon is not shown which appeared during system was initializing.
Bug
fix
1. Sometimes memory
writing was not worked properly in the memory views because
of the vertical/horizontal sroll bar bug.
2.
All included file names appeared in a project window
when
newly added header file name was same as the previous one.
version1.35
Enhanced
feature
1. Crypto enable
menu is added (smart simulator)
2. Time to read
DBG is reduced (70%)
3. Find in files
and Find in project menu are added in popup menu.
4. Page tap is
added.
5. Open rom/eeprom
view is added to ROM/EEPROM code generation.
6. Files can be
set seperately optimize level/compiler/assembler option
7. Show next statement
is added (return PC)
Bug
fix
1. CalmSHINE was
crached when a structure pointer varible was watched
2. CalmSHINE was
crached when you tried to save Data Memory above 0x20000
3. Project option
button was hidden in 800*600 mode bug fix.
4. mrs2 regiter
setting was impossilbe in es instruction
5. CalmSHINE was
crached when you stopped donwloading
6. Toggle disassemble
mode was not worked in EEPROM.
v1.34 2001-10-12
버그 수정
1. 16비트 어드레스에서
Simple TRACE/TIMER 에러 수정.
2. Code Downloading후 다시 start debugging을 하면 통신 에러
발생하던 문제 수정.
3. Microsoft Windows2000에서 새로운 프로젝트 만들 때, 바로 앞에 만든
프로젝트
디렉토리 정보를 기본값으로 표시하지 못했던 문제 수정.
4. 데이터 메모리 덤프 에러 수정.
5. C 컴파일러 옵션 창에서 C 소스파일을 선택후,
'Generate jump tables for switch statement' 옵션 수정시 저장이
제대로 되지 않았던 문제 수정.
향상된 기능
1.CPAD3에서 Internal
Clock 비활성화
2. " -nAN" 컴파일러 옵션 추가(표준 ANSI-C 아님)
3. 최대 Include 디렉토리 32개로 확대
4. S3FC9BJ 용 mon, mem 파일 추가
5. EEPROM이 분리된 영역에서도 ROMCODE 생성가능
6. 'Main'라인에 대한 정보가 없을 때 "reset to emu/simulator
" 메시지 출력하는 대신에
역어셈블 된 화면 보여줌
7. Option 창에서 Include 추가/ 삭제 인터페이스 개선.
8. 디렉토리 편집창에서 팝업 메뉴 추가
9. "29c256" 디바이스 프로그램 가능..
10. S3CC9A9/S3CC9C9/S3CC9CB mon/mem 파일 추가
11.memory16.map 변경하여 쉽게 ROM CODE 생성 기능.
12. cstartup16.s 업데이트 - 사용자 정의 섹션 초기화 관련.
13. CPU 동작 속도 옵션 추가CTR_WAIT)
14. Size_t becomes along type - SWI protocol(FILE
I/O)
-
새 헤더 디렉토리 (header2)
-
Calm16_1_sizet.lib 추가
-
Calm16_code_sizet.lib 추가
15. 디버깅 시작전 프로젝트 옵션 체크.
v1.33 2001-09-07
- linker option save
되지 않은 문제.
- calm이외의 에디터에서 editting된후의 make시의 반영문제.
- output build view 에서 find error 기능 추가.
- mem file read 문제
- Replace all 하다 죽는 현상(win 2000)
- timer의 clock disable- break시 timer의 clock이
증가하지 않도록 수정.
- rom code generation이라는 menu추가
- linker에 있는 fill option 삭제.
- variable view창에서 포인트 변수등의 값이 update가 안된점.
- 구조체의 멤버 변수를 설정해 두고 디버깅을 종료하고 다시 디버깅시에 캄이 죽는 문제.
v1.32 2001-08-20
- 시뮬레이터에서
가끔 T(True)플래그가 업데이트 되지 않았던 버그 수정
- Dissassemble 모드에서 'For' 루프 내의 정보가 누락되었던 버그 수정
- CalmSHINE16 종료후에 메모리 반환 하지 않았던 버그 수정 (80%)
v1.31
2001-08-01
- 여러 변수 단일 라인에
선언시 첫 번째 변수에 대한 정보만 나타났던 버그 수정
- 포인터 변수 수정시, 엉뚱한 GPR이 변경되었던 버그 수정
v1.30 2001-07-23
- 내장 시뮬레이터 기능
강화
- NT 용 병렬 포트 드라이버 추가/ 메모리 낭비 축소
- MEM파일 형식 변경
- 프로젝트 윈도우내에서 파일 위치 변경 기능 추가
- C Startup 파일 변경 ( ex: cstartup16.s(before)->
cstartup16_S3CC9AB.s)
- 디버깅 시작시 지연 시간 축소
- 스마트 카드 시뮬레이터 지원.
v1.25 2001-06-29
- 프로젝트 파일을 읽기
전용으로 설정 가능.
- 16 진수, 10진수 문법 색깔 표시 기능 향상
v1.20 2001-06-13
- 라이브러리 내부로
진입 기능 추가
- 다운로드 중단 기능 추가
- MEM 파일 변경 기능 추가
- 프린트 옵션 추가
- 휠 마우스 지원
- Go/Run 설정 윈도우 인터페이스 향상
- 데이터 메모리 로딩을 위해 파일을 열 경우 offset 주소 지정 기능 향상l
- 역어셈블 윈도우에서 스크롤 문제 해결
- GDI 리소스 낭비 축소
v1.10 2001-04-30
- 단순화된 MDS trace/timer
설정 지원
- Real time view 및 trigger occurrence interva 기능 삭제
- output windows에 복사 및 복사옵션 추가
- 프로젝트 윈도우에 다양한 폴더 관련 옵션 추가
- 라이브러리 내에서도 역어셈블 가능
- 데이터 메모리 로딩을 위해 파일을 열 경우 offset 주소 지정 가능 |
